Custom Apparel and DTF Prints
Custom 18″x24″ yard signs printed in full color on durable corrugated plastic. Built for outdoor use — weatherproof, fade-resistant, and ready to install. Includes a metal H-stake for ground mounting. Upload your design or send us your idea and we’ll build it for you.
Select an option below to get started:
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
For the best results on cups, glass, plastic, metal, or any smooth hard surface, follow these four simple steps:
1. Clean Your Surface
Make sure the surface is clean, dry, and free of dust, lint, oils, or residue. Use rubbing alcohol or a glass cleaner and allow it to fully dry before applying your transfer.
2. Position Your Transfer
Carefully peel the backing off your UV DTF transfer. Align and position it where you want it to stick. Use a squeegee or firm card to press it into place, starting from the center and working outward to eliminate air bubbles.
3. Press & Adhere
Firmly rub over the transfer with even pressure to ensure full adhesion, especially around the edges and fine details.
4. Peel the Top Film
Slowly and carefully peel the clear top film away. If any parts lift with the film, press them back down and rub firmly again before continuing to peel.
TIP: Hand wash only. Avoid dishwashers or soaking the item to prolong the life of the design. UV DTF transfers are waterproof and durable, but gentle care will ensure they last as long as possible.
We accept all file types, but for the best print quality, vector files (like SVG, AI, or EPS) are always preferred. If you’re submitting raster artwork (such as PNG, JPG, or TIFF), please ensure it’s created at a minimum of 300 DPI to maintain sharpness and detail during printing.
Tip:
If you’re designing in Photoshop, Canva or Procreate, we recommend exporting your artwork as a PDF to preserve image quality and scaling accuracy.
At Up Lift Your Heart, we take pride in the quality and care that goes into every transfer we print. Your satisfaction is our priority, and we want you to feel confident with every order you place.
If you’re not completely satisfied with your transfer due to a printing issue, we’re here to make it right. We will happily provide a free reprint using either your original artwork or an updated file of your choice—at no additional cost to you.
Our goal is to ensure that every design you receive reflects the excellence and heart we put into our work. If you ever have questions or concerns about your order, our support team is ready to help.
Enjoy Free Shipping on all orders over $100 of transfers and supplies—automatically applied at checkout.
Orders submitted before 10am will be ready for pickup same day or shipped by end of day.
For full details, please see our Shipping Policy.
If you experience any issues with your order, please contact us within 24 hours of delivery to request a refund or reprint. We’ll gladly reprint any order with verified print quality or adhesion issues. However, we cannot reprint orders where the uploaded artwork is low-resolution.
Refunds or reprints requested for other reasons will require approval from our management team.
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
To get the best results from your DTF transfers, just follow these four simple steps:
1. Position Your Transfer
Place the transfer where you’d like it on the garment. Avoid wrinkles. If needed, use heat-resistant tape to keep the transfer in place.
2. Press
Press at 300°F (149°C) with medium to high pressure for 13 seconds. Always test on one item first. Be cautious of scorching—if that happens, reduce pressure first, then lower the heat if needed.
3. Peel
Wait a few seconds, then peel while still warm. If parts don’t stick, lay it back down and press again with more heat and pressure.
4. Final Press & Care
After peeling, cover the design with parchment paper or a t-shirt and press again for 15 seconds. This boosts durability, reduces shine, and softens the feel.
For best results: wash inside out in cold water and tumble dry low or hang dry.
We accept all file types, but for the best print quality, vector files (like SVG, AI, or EPS) are always preferred. If you’re submitting raster artwork (such as PNG, JPG, or TIFF), please ensure it’s created at a minimum of 300 DPI to maintain sharpness and detail during printing.
Tip:
If you’re designing in Photoshop, Canva or Procreate, we recommend exporting your artwork as a PDF to preserve image quality and scaling accuracy.
At Up Lift Your Heart, we take pride in the quality and care that goes into every transfer we print. Your satisfaction is our priority, and we want you to feel confident with every order you place.
If you’re not completely satisfied with your transfer due to a printing issue, we’re here to make it right. We will happily provide a free reprint using either your original artwork or an updated file of your choice—at no additional cost to you.
Our goal is to ensure that every design you receive reflects the excellence and heart we put into our work. If you ever have questions or concerns about your order, our support team is ready to help.
Enjoy Free Shipping on all orders over $100 of transfers and supplies—automatically applied at checkout.
Orders submitted before 10am will be ready for pickup same day or shipped by end of day.
For full details, please see our Shipping Policy.
If you experience any issues with your order, please contact us within 24 hours of delivery to request a refund or reprint. We’ll gladly reprint any order with verified print quality or adhesion issues. However, we cannot reprint orders where the uploaded artwork is low-resolution.
Refunds or reprints requested for other reasons will require approval from our management team.
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
Glitter DTF
Transform your designs with dazzling shimmer that demands attention! Our Glitter DTF process incorporates fine glitter particles throughout your entire design, creating an eye-catching lustrous finish. The glitter coverage extends evenly across all design elements, delivering a luxurious appearance that elevates any project. This distinctive treatment provides depth and visual interest, making it ideal for designs that need to stand out and leave a lasting impression. Perfect for adding that premium touch that transforms ordinary graphics into extraordinary statements.
Gold & Silver Foil DTF
Elevate your creations with the striking brilliance of metallic foil transfers in gold or silver finishes. These premium transfers create a lustrous, mirror-like surface that brings sophistication to any design. Ideal for single-color applications like brand logos, decorative borders, and highlighting elements, they work seamlessly across diverse fabric types including cotton blends, synthetic materials, and performance fabrics. The straightforward application mirrors conventional DTF processes—simply position, press, and peel with no additional prep work or material removal needed.
To get the best results from your DTF transfers, just follow these four simple steps:
1. Position Your Transfer
Place the transfer where you’d like it on the garment. Avoid wrinkles. If needed, use heat-resistant tape to keep the transfer in place.
2. Press
Press at 300°F (149°C) with medium to high pressure for 13 seconds. Always test on one item first. Be cautious of scorching—if that happens, reduce pressure first, then lower the heat if needed.
3. Peel
Wait a few seconds, then peel while still warm. If parts don’t stick, lay it back down and press again with more heat and pressure.
4. Final Press & Care
After peeling, cover the design with parchment paper or a t-shirt and press again for 15 seconds. This boosts durability, reduces shine, and softens the feel.
For best results: wash inside out in cold water and tumble dry low or hang dry.
We accept all file types, but for the best print quality, vector files (like SVG, AI, or EPS) are always preferred. For specialty dtf, you should submit artwork in a single color format. If you’re submitting raster artwork (such as PNG, JPG, or TIFF), please ensure it’s created at a minimum of 300 DPI to maintain sharpness and detail during printing.
Tip:
If you’re designing in Photoshop, Canva or Procreate, we recommend exporting your artwork as a PDF to preserve image quality and scaling accuracy.
At Up Lift Your Heart, we take pride in the quality and care that goes into every transfer we print. Your satisfaction is our priority, and we want you to feel confident with every order you place.
If you’re not completely satisfied with your transfer due to a printing issue, we’re here to make it right. We will happily provide a free reprint using either your original artwork or an updated file of your choice—at no additional cost to you.
Our goal is to ensure that every design you receive reflects the excellence and heart we put into our work. If you ever have questions or concerns about your order, our support team is ready to help.
Enjoy Free Shipping on all orders over $100 of transfers and supplies—automatically applied at checkout.
Orders submitted before 10am will be ready for pickup same day or shipped by end of day.
For full details, please see our Shipping Policy.
If you experience any issues with your order, please contact us within 24 hours of delivery to request a refund or reprint. We’ll gladly reprint any order with verified print quality or adhesion issues. However, we cannot reprint orders where the uploaded artwork is low-resolution.
Refunds or reprints requested for other reasons will require approval from our management team.
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
At Up Lift Your Heart, we take pride in the quality and care behind every item we offer—from pre-made apparel to custom merch like tote bags, cups, koozies, and more. Each product is thoughtfully selected or created to deliver lasting comfort, function, and style.
If you receive an item that doesn’t meet our quality standards, we’ll make it right with a replacement or refund. Your satisfaction is our top priority.
We want every order—whether it’s a t-shirt you love or a personalized gift—to reflect the heart and purpose behind our brand. Have questions or concerns? Our support team is always here to help.
To keep your apparel and custom merch looking great, we recommend the following:
Wash inside out with cold water
Tumble dry on low or hang to dry
Do not iron directly over designs
Avoid bleach and harsh detergents
Hand wash items like cups or tumblers for longer-lasting results
Proper care ensures your items stay vibrant and last longer!
Shipping costs are calculated at checkout based on the items in your order, their total weight, and the delivery distance. We aim to provide the most accurate and cost-effective shipping options available.
Shipping rates are automatically determined during checkout.
Orders are typically processed and shipped within a few business days.
You’ll receive a tracking number via email once your order has shipped.
Prefer to skip shipping? Local pickup is available at no additional charge. You’ll receive a confirmation email when your order is ready for pickup, along with instructions and pickup hours.
Whether you’re receiving your order by mail or picking it up locally, we’ll keep you updated every step of the way.
We want you to be completely satisfied with your order. If for any reason you’re not happy with your purchase, we offer hassle-free returns and exchanges within 30 days of delivery.
To be eligible for a return or exchange:
Items must be unused, unwashed, and in their original condition.
All original tags or packaging should be included, if applicable.
Customized or personalized products may not be eligible unless they arrive damaged or defective.
Once your return is received and inspected, we’ll notify you of the approval status. Refunds will be processed back to your original payment method. Exchanges are shipped promptly once the returned item is received.
If you need help getting started, please contact our support team with your order number and reason for return, and we’ll guide you through the process.
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
For the best results on cups, glass, plastic, metal, or any smooth hard surface, follow these four simple steps:
1. Clean Your Surface
Make sure the surface is clean, dry, and free of dust, lint, oils, or residue. Use rubbing alcohol or a glass cleaner and allow it to fully dry before applying your transfer.
2. Position Your Transfer
Carefully peel the backing off your UV DTF transfer. Align and position it where you want it to stick. Use a squeegee or firm card to press it into place, starting from the center and working outward to eliminate air bubbles.
3. Press & Adhere
Firmly rub over the transfer with even pressure to ensure full adhesion, especially around the edges and fine details.
4. Peel the Top Film
Slowly and carefully peel the clear top film away. If any parts lift with the film, press them back down and rub firmly again before continuing to peel.
TIP: Hand wash only. Avoid dishwashers or soaking the item to prolong the life of the design. UV DTF transfers are waterproof and durable, but gentle care will ensure they last as long as possible.
We accept all file types, but for the best print quality, vector files (like SVG, AI, or EPS) are always preferred. If you’re submitting raster artwork (such as PNG, JPG, or TIFF), please ensure it’s created at a minimum of 300 DPI to maintain sharpness and detail during printing.
Tip:
If you’re designing in Photoshop, Canva or Procreate, we recommend exporting your artwork as a PDF to preserve image quality and scaling accuracy.
At Up Lift Your Heart, we take pride in the quality and care that goes into every transfer we print. Your satisfaction is our priority, and we want you to feel confident with every order you place.
If you’re not completely satisfied with your transfer due to a printing issue, we’re here to make it right. We will happily provide a free reprint using either your original artwork or an updated file of your choice—at no additional cost to you.
Our goal is to ensure that every design you receive reflects the excellence and heart we put into our work. If you ever have questions or concerns about your order, our support team is ready to help.
Enjoy Free Shipping on all orders over $100 of transfers and supplies—automatically applied at checkout.
Orders submitted before 10am will be ready for pickup same day or shipped by end of day.
For full details, please see our Shipping Policy.
If you experience any issues with your order, please contact us within 24 hours of delivery to request a refund or reprint. We’ll gladly reprint any order with verified print quality or adhesion issues. However, we cannot reprint orders where the uploaded artwork is low-resolution.
Refunds or reprints requested for other reasons will require approval from our management team.
A lot of cheap yard signs look fine on day one and curl up like a potato chip by week two. We don’t do that. Our signs are printed on 4mm corrugated plastic — the same material political campaigns and real estate agents have been using for decades because it actually holds up. UV-protected ink, weather-sealed flutes, and a structure that doesn’t warp in the sun or sag after a rainstorm.
Choose double-sided if your sign will be seen from both directions — front yards on corner lots, driveways with two-way traffic, event entrances, polling locations, etc. Single-sided is fine if the sign faces a road, walkway, or building from one direction only. Pricing for each is in the dropdown above.
You’ve got a few options:
If you’re going the upload route, leave 0.25″ of “bleed” around the edges and keep important text/logos at least 0.5″ from the edge so nothing gets cut off during trimming.
The included stake slides directly into the corrugated flutes on the bottom of the sign — no tools required for soft ground. For harder soil, pre-drive the stake with a rubber mallet before sliding the sign on. Plant the sign at least 6″ deep for stability in wind, deeper if your area gets storms.
Need 10, 50, or 200? Bulk pricing kicks in automatically at quantity breaks shown in the cart. For orders over 100 signs, message us first — we can usually beat the listed bulk rate and offer faster turnaround on larger production runs.
Production takes 2–3 business days from proof approval. Shipping is calculated at checkout based on quantity and destination. Larger orders ship freight and may take a few extra days.
Not sure what size your design needs to be, whether to go single or double-sided, or how many you actually need? Send a message before ordering — easier to figure it out in 30 seconds of back-and-forth than guess and end up with the wrong thing.
At Up Lift Your Heart, we take pride in the quality and care behind every item we offer—from pre-made apparel to custom merch like tote bags, cups, koozies, and more. Each product is thoughtfully selected or created to deliver lasting comfort, function, and style.
If you receive an item that doesn’t meet our quality standards, we’ll make it right with a replacement or refund. Your satisfaction is our top priority.
We want every order—whether it’s a t-shirt you love or a personalized gift—to reflect the heart and purpose behind our brand. Have questions or concerns? Our support team is always here to help.
To keep your apparel and custom merch looking great, we recommend the following:
Wash inside out with cold water
Tumble dry on low or hang to dry
Do not iron directly over designs
Avoid bleach and harsh detergents
Hand wash items like cups or tumblers for longer-lasting results
Proper care ensures your items stay vibrant and last longer!
Shipping costs are calculated at checkout based on the items in your order, their total weight, and the delivery distance. We aim to provide the most accurate and cost-effective shipping options available.
Shipping rates are automatically determined during checkout.
Orders are typically processed and shipped within a few business days.
You’ll receive a tracking number via email once your order has shipped.
Prefer to skip shipping? Local pickup is available at no additional charge. You’ll receive a confirmation email when your order is ready for pickup, along with instructions and pickup hours.
Whether you’re receiving your order by mail or picking it up locally, we’ll keep you updated every step of the way.
We want you to be completely satisfied with your order. If for any reason you’re not happy with your purchase, we offer hassle-free returns and exchanges within 30 days of delivery.
To be eligible for a return or exchange:
Items must be unused, unwashed, and in their original condition.
All original tags or packaging should be included, if applicable.
Customized or personalized products may not be eligible unless they arrive damaged or defective.
Once your return is received and inspected, we’ll notify you of the approval status. Refunds will be processed back to your original payment method. Exchanges are shipped promptly once the returned item is received.
If you need help getting started, please contact our support team with your order number and reason for return, and we’ll guide you through the process.
Yard Signs
Reviews
There are no reviews yet